Refer to the monostable multivibrator circuit in the figure below. The trigger terminal (pin 2 of the IC ) is driven by a symmetrical pulsed waveform of 10…
Refer to the monostable multivibrator circuit in the figure below. The trigger terminal (pin 2 of the IC ) is driven by a symmetrical pulsed waveform of 10 kHz. Determine the duty cycle of the output waveform.
Circuit: a 555 timer IC; pins 4 and 8 are connected to Vcc; a 10 K resistor is connected from Vcc to pins 6 and 7 (joined together); a 0.01 capacitor is connected from pins 6,7 to ground; pin 5 is connected to ground through a 0.01 capacitor; pin 1 is grounded; the Trigger Input is applied to pin 2; the Output is taken from pin 3.
Show answerHide answer
Correct answer: (B) 0.55
Explanation
Answer as per the book's key (b).