BPSC TRE · Topic-wise previous year questions

Chemistry Previous Year Questions (page 2)

238 Chemistry questions asked in BPSC TRE previous year papers, each with the correct answer and explanation. Read them free on UTpaper, or attempt the full papers as timed online tests.

  • 238 questions
  • Official answer key
  • Free
Q51BPSC TRE 1.0 (2023) Chemistry Class 11-12
Setting of cement gets slower by addingनिम्नलिखित में से किसे मिलाने से सीमेंट का जमना धीमा हो जाता है?
  1. Agypsumजिप्सम
  2. Blimestoneचूनापत्थर
  3. Cpotashपोटाश
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) gypsumजिप्सम

Explanation

Gypsum (CaSO₄·2H₂O) is added to cement clinker to slow down its setting, giving enough time for the concrete to be worked.सीमेंट क्लिंकर में जिप्सम (CaSO₄·2H₂O) मिलाया जाता है ताकि उसका जमना धीमा हो जाए और कंक्रीट पर काम करने के लिए पर्याप्त समय मिले।

Q52BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which complex has square planar structure?किस संकुल की संरचना वर्ग समतलीय होती है?
  1. ANi(CO)₄Ni(CO)₄
  2. B[NiCl₄]²⁻[NiCl₄]²⁻
  3. C[Ni(CN)₄]²⁻[Ni(CN)₄]²⁻
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) [Ni(CN)₄]²⁻[Ni(CN)₄]²⁻

Explanation

In [Ni(CN)₄]²⁻, Ni²⁺ (3d⁸) with strong-field CN⁻ pairs its electrons and uses dsp² hybridization, giving a square planar complex. Ni(CO)₄ and [NiCl₄]²⁻ are tetrahedral.[Ni(CN)₄]²⁻ में प्रबल क्षेत्र लिगैंड CN⁻ के साथ Ni²⁺ (3d⁸) अपने इलेक्ट्रॉनों को युग्मित कर dsp² संकरण करता है, जिससे वर्ग समतलीय संकुल बनता है। Ni(CO)₄ और [NiCl₄]²⁻ चतुष्फलकीय हैं।

Q53BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following compounds is used as a purgative in medicine?निम्नलिखित में से किस यौगिक का उपयोग चिकित्सा में रेचक के रूप में किया जाता है?
  1. AQuicklimeबिना बुझा चूना
  2. BLimestoneचूनापत्थर
  3. CMagnesium sulphateमैग्नीशियम सल्फेट
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Magnesium sulphateमैग्नीशियम सल्फेट

Explanation

Magnesium sulphate (Epsom salt, MgSO₄·7H₂O) is used in medicine as a purgative (laxative).मैग्नीशियम सल्फेट (एप्सम लवण, MgSO₄·7H₂O) का उपयोग चिकित्सा में रेचक (विरेचक) के रूप में किया जाता है।

Q54BPSC TRE 1.0 (2023) Chemistry Class 11-12
The chemical formula of sodium nitroprusside isसोडियम नाइट्रोप्रुसाइड का रासायनिक सूत्र है
  1. ANa₄[Fe(CN)₅NO₅]Na₄[Fe(CN)₅NO₅]
  2. BNa₂[Fe(CN)₅(NO)]Na₂[Fe(CN)₅(NO)]
  3. CNaFe[Fe(CN)₆]NaFe[Fe(CN)₆]
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Na₂[Fe(CN)₅(NO)]Na₂[Fe(CN)₅(NO)]

Explanation

Sodium nitroprusside is Na₂[Fe(CN)₅(NO)]: Fe is +2, five CN⁻ and one NO⁺ give the complex ion a charge of −2, balanced by two Na⁺.सोडियम नाइट्रोप्रुसाइड Na₂[Fe(CN)₅(NO)] है: Fe +2 में है, पाँच CN⁻ और एक NO⁺ संकुल आयन को −2 आवेश देते हैं, जिसे दो Na⁺ संतुलित करते हैं।

Q55BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following is known as ‘inorganic benzene’?निम्नलिखित में से किसे ‘अकार्बनिक बेंजीन’ के नाम से जाना जाता है?
  1. ADiboraneडाइबोरेन
  2. BBoraneबोरेन
  3. CBorazineबोराज़िन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Borazineबोराज़िन

Explanation

Borazine, B₃N₃H₆, has a six-membered ring of alternating B and N atoms with delocalised electrons, much like benzene, so it is called inorganic benzene.बोराज़िन, B₃N₃H₆, में B और N परमाणुओं का एकांतरित छह-सदस्यीय वलय होता है जिसमें विस्थानीकृत इलेक्ट्रॉन होते हैं, बहुत कुछ बेंजीन जैसा, इसलिए इसे अकार्बनिक बेंजीन कहा जाता है।

Q56BPSC TRE 1.0 (2023) Chemistry Class 11-12
Homolytic fission of the bond will formकिसी बंध का सम-अपघटनीय विखण्डन बनाएगा
  1. Acarbanionकार्ब-ऋणायन
  2. Bcarbocationकार्ब-धनायन
  3. Cfree radicalमुक्त मूलक
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) free radicalमुक्त मूलक

Explanation

In homolytic fission each atom keeps one electron of the shared pair, so species with unpaired electrons, i.e. free radicals, are formed.सम-अपघटनीय विखण्डन में प्रत्येक परमाणु साझा युग्म का एक इलेक्ट्रॉन अपने पास रख लेता है, इसलिए अयुग्मित इलेक्ट्रॉन वाली स्पीशीज़ अर्थात् मुक्त मूलक बनते हैं।

Q57BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following boron compounds is used as a reducing agent in organic synthesis?निम्नलिखित में से किस बोरॉन यौगिक का उपयोग कार्बनिक संश्लेषण में अपचायक के रूप में किया जाता है?
  1. AB₂H₆B₂H₆
  2. BLiBH₄LiBH₄
  3. CH₃BO₃H₃BO₃
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) LiBH₄LiBH₄

Explanation

Lithium borohydride, LiBH₄, is a hydride-donating reducing agent widely used in organic synthesis, for example to reduce esters and carbonyl compounds to alcohols. H₃BO₃ is not a reducing agent.लीथियम बोरोहाइड्राइड, LiBH₄, हाइड्राइड देने वाला अपचायक है जिसका कार्बनिक संश्लेषण में व्यापक उपयोग होता है, जैसे एस्टर और कार्बोनिल यौगिकों को ऐल्कोहॉल में अपचयित करने के लिए। H₃BO₃ अपचायक नहीं है।

Q58BPSC TRE 1.0 (2023) Chemistry Class 11-12
Select the electrophilic reagent out of the following.निम्नलिखित में से इलेक्ट्रोफिलिक अभिकर्मक का चयन कीजिए।
  1. AOH⁻OH⁻
  2. BBr⁺Br⁺
  3. CAlCl₃AlCl₃
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Br⁺Br⁺

Explanation

Note: the official key gives (B); AlCl₃, a Lewis acid, is also an electron-pair acceptor and is often counted as an electrophile, so (D) could be argued. An electrophile is an electron-seeking species; Br⁺ is electron-deficient and positively charged, so it is a typical electrophile, while OH⁻ is a nucleophile.नोट: आधिकारिक उत्तर कुंजी में (B) दिया गया है; AlCl₃, जो लुईस अम्ल है, भी इलेक्ट्रॉन युग्म ग्राही है और प्रायः इलेक्ट्रॉनस्नेही माना जाता है, इसलिए (D) पर भी तर्क दिया जा सकता है। इलेक्ट्रॉनस्नेही इलेक्ट्रॉन चाहने वाली स्पीशीज़ है; Br⁺ इलेक्ट्रॉन-न्यून और धनावेशित है, इसलिए यह विशिष्ट इलेक्ट्रॉनस्नेही है, जबकि OH⁻ नाभिकस्नेही है।

Q59BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following carbides is known as carborundum?निम्नलिखित में से किस कार्बाइड को कार्बोरंडम के रूप में जाना जाता है?
  1. ACalcium carbideकैल्सियम कार्बाइड
  2. BTungsten carbideटंग्स्टन कार्बाइड
  3. CSilicon carbideसिलिकॉन कार्बाइड
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Silicon carbideसिलिकॉन कार्बाइड

Explanation

Silicon carbide, SiC, is called carborundum. It is extremely hard and is used as an abrasive.सिलिकॉन कार्बाइड, SiC, को कार्बोरंडम कहते हैं। यह अत्यंत कठोर होता है और अपघर्षक के रूप में प्रयोग किया जाता है।

Q60BPSC TRE 1.0 (2023) Chemistry Class 11-12
The rotation of plane-polarized light is measured byसमतल ध्रुवीय प्रकाश के घूर्णन का मापन किसके द्वारा किया जाता है?
  1. Amanometerमैनोमीटर
  2. Bgasometerगैसोमीटर
  3. Cpolarimeterपोलरीमीटर
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) polarimeterपोलरीमीटर

Explanation

The rotation of plane-polarized light by optically active substances is measured with a polarimeter.प्रकाशिक सक्रिय पदार्थों द्वारा समतल ध्रुवित प्रकाश का घूर्णन पोलरीमीटर से मापा जाता है।

Q61BPSC TRE 1.0 (2023) Chemistry Class 11-12
Pure nitrogen can be obtained by which of the following reactions?शुद्ध नाइट्रोजन निम्नलिखित में से किस अभिक्रिया द्वारा प्राप्त किया जा सकता है?
  1. A(NH₄)₂Cr₂O₇ → N₂ + 4H₂O + Cr₂O₃(NH₄)₂Cr₂O₇ → N₂ + 4H₂O + Cr₂O₃
  2. BBa(N₃)₂ → Ba + 3N₂Ba(N₃)₂ → Ba + 3N₂
  3. C2NH₃ + 3CuO → N₂ + 3Cu + 3H₂O2NH₃ + 3CuO → N₂ + 3Cu + 3H₂O
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Ba(N₃)₂ → Ba + 3N₂Ba(N₃)₂ → Ba + 3N₂

Explanation

Heating barium azide gives very pure nitrogen: Ba(N₃)₂ → Ba + 3N₂. The dichromate and CuO/NH₃ routes give N₂ contaminated with traces of other gases (e.g. NO, NH₃, water vapour), so very pure nitrogen is obtained by decomposing an azide.बेरियम ऐज़ाइड को गर्म करने पर बहुत शुद्ध नाइट्रोजन मिलती है: Ba(N₃)₂ → Ba + 3N₂। डाइक्रोमेट और CuO/NH₃ वाली विधियों से मिली N₂ में अन्य गैसों (जैसे NO, NH₃, जलवाष्प) की सूक्ष्म मात्रा रहती है, इसलिए बहुत शुद्ध नाइट्रोजन ऐज़ाइड के अपघटन से प्राप्त होती है।

Q62BPSC TRE 1.0 (2023) Chemistry Class 11-12
The alkane obtained by the electrolysis of potassium acetate isकौन-सा ऐल्केन, पोटैशियम ऐसीटेट के विद्युत्-अपघटन से प्राप्त होता है?
  1. AC₂H₆C₂H₆
  2. BCH₄CH₄
  3. CC₂H₂C₂H₂
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) C₂H₆C₂H₆

Explanation

In Kolbe's electrolysis, acetate ions are oxidized at the anode to CH₃· radicals, which combine to give ethane (C₂H₆).कोल्बे विद्युत्-अपघटन में ऐसीटेट आयन ऐनोड पर ऑक्सीकृत होकर CH₃· मूलक बनाते हैं, जो जुड़कर एथेन (C₂H₆) देते हैं।

Q63BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following oxides of nitrogen is used as an anaesthetic?निम्नलिखित में से नाइट्रोजन के किस ऑक्साइड का उपयोग निश्चेतक के रूप में किया जाता है?
  1. AN₂ON₂O
  2. BNONO
  3. CNO₂NO₂
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) N₂ON₂O

Explanation

Nitrous oxide (N₂O), called laughing gas, is used as a mild anaesthetic.नाइट्रस ऑक्साइड (N₂O), जिसे हँसाने वाली गैस कहते हैं, हल्के निश्चेतक के रूप में प्रयोग की जाती है।

Q64BPSC TRE 1.0 (2023) Chemistry Class 11-12
The hydrocarbon formed by the action of sodium on ethyl iodide isसोडियम और एथिल आयोडाइड की क्रिया से कौन-सा हाइड्रोकार्बन बनता है?
  1. Abutaneब्यूटेन
  2. Bethaneईथेन
  3. Cpropaneप्रोपेन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) butaneब्यूटेन

Explanation

This is the Wurtz reaction: 2C₂H₅I + 2Na → C₄H₁₀ + 2NaI, so two ethyl groups join to form butane.यह वुर्ट्ज़ अभिक्रिया है: 2C₂H₅I + 2Na → C₄H₁₀ + 2NaI, अर्थात् दो एथिल समूह जुड़कर ब्यूटेन बनाते हैं।

Q65BPSC TRE 1.0 (2023) Chemistry Class 11-12
Nitric acid is reduced to nitrogen dioxide in which of the following reactions?निम्नलिखित में से किस अभिक्रिया में नाइट्रिक अम्ल, नाइट्रोजन डाइऑक्साइड में अपचयित हो जाता है?
  1. AC + 4HNO₃ → CO₂ + 2H₂O + 4NO₂C + 4HNO₃ → CO₂ + 2H₂O + 4NO₂
  2. B(1/8)S₈ + 6HNO₃ → H₂SO₄ + 6NO₂ + 2H₂O(1/8)S₈ + 6HNO₃ → H₂SO₄ + 6NO₂ + 2H₂O
  3. CCu + 4HNO₃ → Cu(NO₃)₂ + 2NO₂ + 2H₂OCu + 4HNO₃ → Cu(NO₃)₂ + 2NO₂ + 2H₂O
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (D) More than one of the aboveउपर्युक्त में से एक से अधिक

Explanation

In all three reactions concentrated HNO₃ acts as an oxidising agent and is reduced to NO₂ (N goes from +5 to +4) while oxidising carbon, sulphur and copper, so more than one option is correct.तीनों अभिक्रियाओं में सांद्र HNO₃ ऑक्सीकारक की तरह कार्य करता है और NO₂ में अपचयित हो जाता है (N का +5 से +4), तथा कार्बन, सल्फर और कॉपर का ऑक्सीकरण करता है, इसलिए एक से अधिक विकल्प सही हैं।

Q66BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following compounds is most acidic in character?निम्नलिखित में से कौन-सा यौगिक सबसे अधिक अम्लीय गुण वाला है?
  1. ACH₄CH₄
  2. BCH₂=CH₂CH₂=CH₂
  3. CCH≡CHCH≡CH
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) CH≡CHCH≡CH

Explanation

In ethyne (CH≡CH) the carbon is sp hybridized with 50% s-character, so it holds the C–H bonding electrons closely and the hydrogen is the most acidic, more than in ethene (sp²) or methane (sp³).एथाइन (CH≡CH) में कार्बन sp संकरित है जिसमें 50% s-गुण होता है, इसलिए यह C–H आबंध के इलेक्ट्रॉनों को पास खींचकर रखता है और हाइड्रोजन सबसे अधिक अम्लीय होता है, एथीन (sp²) या मीथेन (sp³) से भी अधिक।

Q67BPSC TRE 1.0 (2023) Chemistry Class 11-12
In which C–C bond of CH₃CH₂CH₂Br, the inductive effect is expected to be the least?CH₃CH₂CH₂Br के किस C–C बन्ध में प्रेरक प्रभाव सबसे कम होने की उम्मीद है?
  1. AC₁–C₂C₁–C₂
  2. BC₂–C₃C₂–C₃
  3. CC₁–C₃C₁–C₃
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) C₂–C₃C₂–C₃

Explanation

The inductive effect of Br weakens quickly with distance along the chain. In CH₃CH₂CH₂Br (C₁ bears Br), the C₂–C₃ bond is farthest from Br, so the effect there is least. C₁–C₃ is not a bond.Br का प्रेरक प्रभाव श्रृंखला में दूरी के साथ तेजी से घटता है। CH₃CH₂CH₂Br में (C₁ पर Br है) C₂–C₃ आबंध Br से सबसे दूर है, इसलिए वहाँ प्रभाव सबसे कम है। C₁–C₃ आबंध नहीं है।

Q68BPSC TRE 1.0 (2023) Chemistry Class 11-12
When acetylene is passed through dilute H₂SO₄ in the presence of HgSO₄, the compound obtained isHgSO₄ की उपस्थिति में जब एसिटिलीन, तनु H₂SO₄ से गुजारी जाती है, तो कौन-सा यौगिक मिलता है?
  1. AC₂H₅OHC₂H₅OH
  2. BCH₃COCH₃CH₃COCH₃
  3. CCH₃CHOCH₃CHO
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) CH₃CHOCH₃CHO

Explanation

Acetylene adds water in the presence of dilute H₂SO₄ and HgSO₄ to give vinyl alcohol, which tautomerises to acetaldehyde (CH₃CHO).तनु H₂SO₄ और HgSO₄ की उपस्थिति में ऐसिटिलीन जल जोड़कर वाइनिल ऐल्कोहॉल बनाती है, जो चलावयवीकरण द्वारा ऐसीटैल्डिहाइड (CH₃CHO) में बदल जाता है।

Q69BPSC TRE 1.0 (2023) Chemistry Class 11-12
Identify the following transformation according to the reaction type: H₂C=CH–CH₂CH₃ → H₃CCH=CHCH₃अभिक्रिया प्रकार के अनुसार, निम्नलिखित परिवर्तन को पहचानिए : H₂C=CH–CH₂CH₃ → H₃CCH=CHCH₃
  1. ASubstitutionप्रतिस्थापन
  2. BIsomerizationसमावयवीकरण
  3. CEliminationविलोपन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Isomerizationसमावयवीकरण

Explanation

But-1-ene changes into but-2-ene: the molecular formula stays C₄H₈ and only the position of the double bond changes, so this is an isomerization.ब्यूट-1-ईन ब्यूट-2-ईन में बदलती है: आण्विक सूत्र C₄H₈ वही रहता है और केवल द्विआबंध की स्थिति बदलती है, इसलिए यह समावयवीकरण है।

Q70BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following compounds shows cis-trans isomerism?निम्नलिखित में से कौन-सा यौगिक सिस-ट्रांस आइसोमेरिज्म दर्शाता है?
  1. A(H₃C)₂C=CH–CH₃(H₃C)₂C=CH–CH₃
  2. BH₂C=CCl₂H₂C=CCl₂
  3. CC₆H₅(H)C=CH–CH₃C₆H₅(H)C=CH–CH₃
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) C₆H₅(H)C=CH–CH₃C₆H₅(H)C=CH–CH₃

Explanation

Cis-trans isomerism needs two different groups on each doubly bonded carbon. In C₆H₅CH=CHCH₃ each carbon carries H and a different group, so it shows cis-trans isomerism. In (A) and (B) one carbon has two identical groups.सिस-ट्रांस समावयवता के लिए प्रत्येक द्विआबंधित कार्बन पर दो भिन्न समूह होने चाहिए। C₆H₅CH=CHCH₃ में प्रत्येक कार्बन पर H और एक अलग समूह है, इसलिए यह सिस-ट्रांस समावयवता दर्शाता है। (A) और (B) में एक कार्बन पर दो समान समूह हैं।

Q71BPSC TRE 1.0 (2023) Chemistry Class 11-12
The synthetic method developed for the manufacture of petrol isपेट्रोल के निर्माण के लिए कौन-सी सिंथेटिक विधि विकसित की गई है?
  1. AFischer-Tropsch processफिशर-ट्रॉप्स प्रक्रिया
  2. BBergius processबर्गियस प्रक्रिया
  3. Caromatizationसुगंधीकरण
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (D) More than one of the aboveउपर्युक्त में से एक से अधिक

Explanation

Synthetic petrol is made both by the Fischer–Tropsch process (CO + H₂ over a catalyst) and by the Bergius process (hydrogenation of coal), so more than one option is correct.सिंथेटिक पेट्रोल फिशर–ट्रॉप्श प्रक्रम (उत्प्रेरक पर CO + H₂) और बर्गियस प्रक्रम (कोयले का हाइड्रोजनीकरण) दोनों से बनाया जाता है, इसलिए एक से अधिक विकल्प सही हैं।

Q72BPSC TRE 1.0 (2023) Chemistry Class 11-12
Natural rubber is a polymer ofप्राकृतिक रबर किसका बहुलक है?
  1. Aisobutyleneआइसोब्यूटीलीन
  2. Bchloropreneक्लोरोप्रीन
  3. Cisopreneआइसोप्रीन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) isopreneआइसोप्रीन

Explanation

Natural rubber is cis-1,4-polyisoprene, a polymer of isoprene (2-methyl-1,3-butadiene).प्राकृतिक रबर सिस-1,4-पॉलीआइसोप्रीन है, जो आइसोप्रीन (2-मेथिल-1,3-ब्यूटाडाईन) का बहुलक है।

Q73BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following is nonaromatic based on Hückel’s rule?हकल के नियम के आधार पर निम्नलिखित में से कौन-सा गैर-सुगंधित है?
  1. ANaphthaleneनैफ़्थलीन
  2. BAnthraceneऐन्थ्रासीन
  3. CPhenanthreneफेनेन्थ्रीन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (E) None of the aboveउपर्युक्त में से कोई नहीं

Explanation

Naphthalene (10 π electrons), anthracene and phenanthrene (14 π electrons each) are planar, fully conjugated and follow the (4n + 2) rule, so all are aromatic and none is nonaromatic.नैफ़्थलीन (10 π इलेक्ट्रॉन), ऐन्थ्रासीन और फेनेन्थ्रीन (प्रत्येक में 14 π इलेक्ट्रॉन) समतलीय, पूर्णतः संयुग्मित हैं और (4n + 2) नियम का पालन करते हैं, इसलिए सभी सुगंधित हैं और कोई भी गैर-सुगंधित नहीं है।

Q74BPSC TRE 1.0 (2023) Chemistry Class 11-12
Conformations can be represented byअनुरूपताओं का प्रतिनिधित्व किया जा सकता है
  1. ASawhorse projectionसॉहॉर्स प्रोजेक्शन द्वारा
  2. BNewman projectionन्यूमैन प्रोजेक्शन द्वारा
  3. Cenantiomerएनैन्टीओमर द्वारा
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (D) More than one of the aboveउपर्युक्त में से एक से अधिक

Explanation

Conformations are represented by Sawhorse and Newman projections. An enantiomer is a type of stereoisomer, not a representation, so (A) and (B) are correct.अनुरूपताओं को सॉहॉर्स और न्यूमैन प्रोजेक्शन से दर्शाया जाता है। एनैन्टीओमर एक प्रकार का त्रिविम समावयवी है, निरूपण का तरीका नहीं, इसलिए (A) और (B) सही हैं।

Q75BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following reduces Tollens’ reagent?निम्नलिखित में से कौन-सा टोलेन्स अभिकर्मक को अपचयित करता है?
  1. ACane sugarगन्ना
  2. BStarchस्टार्च
  3. CGlucoseग्लूकोज
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Glucoseग्लूकोज

Explanation

Glucose is a reducing sugar with a free aldehyde group, so it reduces Tollens' reagent to a silver mirror. Cane sugar (sucrose) and starch are non-reducing.ग्लूकोज एक अपचायी शर्करा है जिसमें मुक्त ऐल्डिहाइड समूह होता है, इसलिए यह टॉलेन्स अभिकर्मक को अपचयित कर सिल्वर दर्पण बनाता है। गन्ने की शर्करा (सुक्रोज) और स्टार्च अनपचायी हैं।

Q76BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following pesticides is out of use?निम्नलिखित में से किस कीटनाशक का उपयोग वर्जित है?
  1. ADDTडी॰ डी॰ टी॰
  2. BNaClO₃NaClO₃
  3. CTriazineट्रायज़ीन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) DDTडी॰ डी॰ टी॰

Explanation

DDT is a persistent, non-biodegradable pesticide that accumulates in food chains, so its use has been banned in many countries.DDT एक स्थायी, अजैव-निम्नीकरणीय कीटनाशक है जो खाद्य श्रृंखलाओं में संचित होता है, इसलिए कई देशों में इसके उपयोग पर प्रतिबंध है।

Q77BPSC TRE 1.0 (2023) Chemistry Class 11-12
Arrange the following halides in order of increasing SN2 reactivity: CH₃Cl, CH₃CH₂Cl, (CH₃)₂CHClनिम्नलिखित हैलाइडों को SN2 अभिक्रियाशीलता के बढ़ते क्रम में व्यवस्थित कीजिए : CH₃Cl, CH₃CH₂Cl, (CH₃)₂CHCl
  1. A(CH₃)₂CHCl < CH₃CH₂Cl < CH₃Cl(CH₃)₂CHCl < CH₃CH₂Cl < CH₃Cl
  2. BCH₃CH₂Cl < CH₃Cl < (CH₃)₂CHClCH₃CH₂Cl < CH₃Cl < (CH₃)₂CHCl
  3. CCH₃Cl < (CH₃)₂CHCl < CH₃CH₂ClCH₃Cl < (CH₃)₂CHCl < CH₃CH₂Cl
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) (CH₃)₂CHCl < CH₃CH₂Cl < CH₃Cl(CH₃)₂CHCl < CH₃CH₂Cl < CH₃Cl

Explanation

SN2 reactivity falls as steric hindrance at the carbon rises: methyl > primary > secondary. So the increasing order is (CH₃)₂CHCl < CH₃CH₂Cl < CH₃Cl.SN2 अभिक्रियाशीलता कार्बन पर त्रिविम बाधा बढ़ने के साथ घटती है: मेथिल > प्राथमिक > द्वितीयक। इसलिए बढ़ता क्रम (CH₃)₂CHCl < CH₃CH₂Cl < CH₃Cl है।

Q78BPSC TRE 1.0 (2023) Chemistry Class 11-12
Lassaigne’s test is not used for the detection ofलैसेग्ने परीक्षण का उपयोग किसका पता लगाने के लिए नहीं किया जाता है?
  1. Asulphurसल्फर
  2. Bphosphorusफॉस्फोरस
  3. Ccarbonकार्बन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) carbonकार्बन

Explanation

Lassaigne's (sodium fusion) test detects nitrogen, sulphur, halogens and phosphorus in organic compounds. Carbon is detected by other methods (heating with CuO), so it is not detected by this test.लैसेग्ने (सोडियम संगलन) परीक्षण कार्बनिक यौगिकों में नाइट्रोजन, सल्फर, हैलोजन और फॉस्फोरस का पता लगाता है। कार्बन का पता अन्य विधियों (CuO के साथ गर्म करने) से लगाया जाता है, इसलिए इस परीक्षण से उसका पता नहीं चलता।

Q79BPSC TRE 1.0 (2023) Chemistry Class 11-12
Which of the following is used in industry as a solvent for fats, waxes, resins and rubbers?निम्नलिखित में से किसका उपयोग उद्योग में वसा, मोम, रेजिन और रबर के लिए विलायक के रूप में किया जाता है?
  1. ADichloromethaneडाइक्लोरोमीथेन
  2. BTrichloromethaneट्राइक्लोरोमीथेन
  3. CCarbylamineकार्बिलऐमीन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Trichloromethaneट्राइक्लोरोमीथेन

Explanation

Trichloromethane (chloroform) is used industrially as a solvent for fats, waxes, resins, rubber and alkaloids.ट्राइक्लोरोमीथेन (क्लोरोफॉर्म) का उपयोग उद्योग में वसा, मोम, रेजिन, रबर और ऐल्केलॉइडों के विलायक के रूप में किया जाता है।

Q80BPSC TRE 2.0 (2023) Chemistry Class 11-12
What are the key factors of solid-state reactions?ठोस-अवस्था प्रतिक्रियाओं का प्रमुख कारक क्या है?
  1. ASize of the particlesकणों का आकार
  2. BEnvironmental factorsपर्यावरणीय कारक
  3. CMechanical properties of solidsठोस पदार्थों के यांत्रिक गुण
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (D) More than one of the aboveउपर्युक्त में से एक से अधिक

Explanation

The rate of a solid-state reaction depends on several factors: the size (surface area) of the particles in contact, the reaction conditions such as temperature and atmosphere, and the structural and mechanical properties of the solids. Since several listed factors apply, more than one option is correct.ठोस-अवस्था अभिक्रिया की दर कई कारकों पर निर्भर करती है: संपर्क में आने वाले कणों का आकार (पृष्ठीय क्षेत्रफल), ताप और वायुमंडल जैसी अभिक्रिया की परिस्थितियाँ, तथा ठोसों के संरचनात्मक और यांत्रिक गुण। चूँकि सूचीबद्ध कई कारक लागू होते हैं, इसलिए एक से अधिक विकल्प सही हैं।

Q81BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which approach can be employed to produce a high degree of homogeneity in the creation of ZnFe₂O₄ spinel?ZnFe₂O₄ स्पिनल के निर्माण में उच्च स्तर की एकरूपता उत्पन्न करने के लिए कौन-सी विधि नियोजित की जा सकती है?
  1. ADistillation methodआसवन विधि
  2. BVaporization methodवाष्पीकरण विधि
  3. CCoprecipitation methodसहअवक्षेपण विधि
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Coprecipitation methodसहअवक्षेपण विधि

Explanation

In the coprecipitation method Zn²⁺ and Fe³⁺ ions are precipitated together from one solution (e.g. as oxalates or hydroxides), so the two metals are mixed on an atomic scale. Heating this precursor gives a highly homogeneous ZnFe₂O₄ spinel at a lower temperature than mixing solid oxides.सहअवक्षेपण विधि में Zn²⁺ और Fe³⁺ आयन एक ही विलयन से साथ-साथ अवक्षेपित होते हैं (जैसे ऑक्सालेट या हाइड्रॉक्साइड के रूप में), इसलिए दोनों धातुएँ परमाणु स्तर पर मिली होती हैं। इस पूर्वगामी को गर्म करने पर ठोस ऑक्साइडों को मिलाने की तुलना में कम ताप पर अत्यंत समांग ZnFe₂O₄ स्पिनल प्राप्त होता है।

Q82BPSC TRE 2.0 (2023) Chemistry Class 11-12
In the zone melting approach, which of the following principles was used?ज़ोन पिघलने के दृष्टिकोण में, निम्नलिखित में से किस सिद्धांत का उपयोग किया गया था?
  1. AImpurities concentrate in the liquid phase than in the gaseous phaseअशुद्धियाँ गैसीय चरण की तुलना में तरल चरण में केंद्रित होती हैं
  2. BImpurities concentrate in the liquid phase than in the solid phaseअशुद्धियाँ ठोस चरण की तुलना में तरल चरण में केंद्रित होती हैं
  3. CImpurities concentrate in the solid phase than in the liquid phaseअशुद्धियाँ तरल चरण की तुलना में ठोस चरण में केंद्रित होती हैं
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Impurities concentrate in the liquid phase than in the solid phaseअशुद्धियाँ ठोस चरण की तुलना में तरल चरण में केंद्रित होती हैं

Explanation

Zone refining is based on the fact that impurities are more soluble in the melt than in the solid. As the molten zone moves along the rod, the impurities stay in the liquid and are swept to one end, leaving purer solid behind.क्षेत्र परिष्करण (ज़ोन रिफाइनिंग) इस तथ्य पर आधारित है कि अशुद्धियाँ ठोस की तुलना में गलित अवस्था में अधिक विलेय होती हैं। जैसे-जैसे गलित क्षेत्र छड़ के अनुदिश आगे बढ़ता है, अशुद्धियाँ द्रव में बनी रहती हैं और एक सिरे की ओर बह जाती हैं, जिससे पीछे अधिक शुद्ध ठोस बचता है।

Q83BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which solid structure has a definite and sharp melting point?किस ठोस संरचना का गलनांक निश्चित एवं तीव्र होता है?
  1. ACrystalline solidsक्रिस्टलीय ठोस
  2. BNo type of solidsकिसी प्रकार का ठोस नहीं
  3. CAll types of solidsसभी प्रकार के ठोस
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) Crystalline solidsक्रिस्टलीय ठोस

Explanation

Crystalline solids have a regular long-range arrangement of particles, so all bonds break at the same temperature and they melt sharply at a definite point. Amorphous solids soften over a range of temperatures.क्रिस्टलीय ठोसों में कणों की नियमित दीर्घ-परास व्यवस्था होती है, इसलिए सभी आबंध एक ही ताप पर टूटते हैं और वे एक निश्चित बिंदु पर तीव्रता से पिघलते हैं। अक्रिस्टलीय ठोस तापों के एक परास में नरम होते हैं।

Q84BPSC TRE 2.0 (2023) Chemistry Class 11-12
_____ is a crystalline’s basic repetitive structural unit._____ एक क्रिस्टलीय की मूल दोहरावदार संरचनात्मक इकाई है।
  1. AMonomerएकलक
  2. BMoleculeअणु
  3. CUnit cellयूनिट सेल
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Unit cellयूनिट सेल

Explanation

The unit cell is the smallest repeating portion of a crystal lattice; repeating it in three dimensions generates the whole crystal.एकक कोष्ठिका क्रिस्टल जालक का सबसे छोटा दोहराव वाला भाग है; इसे तीन विमाओं में दोहराने पर पूरा क्रिस्टल बनता है।

Q85BPSC TRE 2.0 (2023) Chemistry Class 11-12
Sulfur exists in two polymorphic forms _____ and _____.सल्फर दो बहुरूपी रूपों _____ और _____ में मौजूद होता है।
  1. Arhombic, monoclinicरॉम्बिक, मोनोक्लिनिक
  2. Brhombic, triclinicरॉम्बिक, ट्राइक्लिनिक
  3. Chexagonal, triclinicहेक्सागोनल, ट्राइक्लिनिक
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) rhombic, monoclinicरॉम्बिक, मोनोक्लिनिक

Explanation

Sulfur shows polymorphism: rhombic (α) sulfur is stable below 369 K and changes into monoclinic (β) sulfur above this temperature.सल्फर बहुरूपता दर्शाता है: समचतुर्भुजी (α) सल्फर 369 K से नीचे स्थायी है और इस ताप से ऊपर एकनताक्ष (β) सल्फर में बदल जाता है।

Q86BPSC TRE 2.0 (2023) Chemistry Class 11-12
What is the total number of Bravais lattices in the crystal structures?क्रिस्टल की संरचनाओं में ब्रैविस जालकों की कुल संख्या कितनी है?
  1. A33
  2. B66
  3. C1414
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) 1414

Explanation

The seven crystal systems combined with the possible lattice centrings (primitive, body-centred, face-centred, end-centred) give 14 distinct Bravais lattices.सात क्रिस्टल निकाय, संभावित जालक केंद्रण (आदिम, अंतःकेंद्रित, फलक-केंद्रित, छोर-केंद्रित) के साथ मिलकर 14 भिन्न ब्रैवे जालक देते हैं।

Q87BPSC TRE 2.0 (2023) Chemistry Class 11-12
What are the crystallization’s initial materials?क्रिस्टलीकरण की प्रारंभिक सामग्री क्या हैं?
  1. ALiquid, aqueous solution, emulsionतरल, जलीय घोल, इमल्शन
  2. BGas, aqueous solution, foamगैस, जलीय घोल, फोम
  3. CAqueous solution, melt, glass or gelजलीय घोल, पिघला हुआ, काँच या जेल
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) Aqueous solution, melt, glass or gelजलीय घोल, पिघला हुआ, काँच या जेल

Explanation

Crystals are grown from an aqueous solution, from a melt, or from a glass or gel medium (vapour growth is a further method). These are the usual starting materials of crystallization.क्रिस्टल जलीय विलयन से, गलित अवस्था से, या काँच अथवा जेल माध्यम से उगाए जाते हैं (वाष्प वृद्धि एक अन्य विधि है)। ये क्रिस्टलीकरण की सामान्य प्रारंभिक सामग्रियाँ हैं।

Q88BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which of the following volumes occupied by a single gas in a mixture at the same temperature and pressure is referred to as the single-gas volume?समान तापमान और दबाव पर मिश्रण में एकल- गैस द्वारा व्याप्त किस आयतन को एकल-गैस आयतन कहा जाता है?
  1. AAbsolute volumeपूर्ण आयतन
  2. BPartial volumeआंशिक आयतन
  3. CTotal volume of a gas mixtureगैस मिश्रण का कुल आयतन
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Partial volumeआंशिक आयतन

Explanation

The partial volume of a gas in a mixture is the volume it would occupy alone at the same temperature and pressure as the mixture (Amagat's law). The partial volumes add up to the total volume.मिश्रण में किसी गैस का आंशिक आयतन वह आयतन है जो वह अकेली, मिश्रण के समान ताप और दाब पर घेरेगी (एमागा का नियम)। आंशिक आयतनों का योग कुल आयतन के बराबर होता है।

Q89BPSC TRE 2.0 (2023) Chemistry Class 11-12
The pressure that a single component in a gaseous mixture would exert if it existed alone in the same volume as the mixture and at the same temperature as the mixture is referred to asगैसीय मिश्रण में एक घटक जो दबाव डालेगा यदि वह मिश्रण के समान आयतन में और मिश्रण के समान तापमान पर अकेला मौजूद हो, उसे कहा जाता है
  1. Aabsolute pressureपूर्ण दबाव
  2. Bpartial pressureआंशिक दबाव
  3. Ctotal pressure of a gas mixtureगैस मिश्रण का कुल दबाव
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) partial pressureआंशिक दबाव

Explanation

This is the definition of partial pressure. By Dalton's law, the total pressure of a gas mixture is the sum of the partial pressures of its components.यह आंशिक दाब की परिभाषा है। डाल्टन के नियम के अनुसार, गैस मिश्रण का कुल दाब उसके घटकों के आंशिक दाबों का योग होता है।

Q90BPSC TRE 2.0 (2023) Chemistry Class 11-12
_____ obeys Raoult’s law in all stages of concentration._____ एकाग्रता के सभी चरणों में राउल्ट के नियम का पालन करता है।
  1. AIdeal solutionआदर्श समाधान
  2. BNon-ideal solutionगैस-आदर्श समाधान
  3. CReal solutionवास्तविक समाधान
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) Ideal solutionआदर्श समाधान

Explanation

An ideal solution obeys Raoult's law over the entire range of concentration, with ΔH(mix) = 0 and ΔV(mix) = 0. Non-ideal (real) solutions show positive or negative deviations.आदर्श विलयन सांद्रता के पूरे परास में राउल्ट के नियम का पालन करता है, जिसमें ΔH(मिश्रण) = 0 और ΔV(मिश्रण) = 0 होता है। अनादर्श (वास्तविक) विलयन धनात्मक या ऋणात्मक विचलन दर्शाते हैं।

Q91BPSC TRE 2.0 (2023) Chemistry Class 11-12
When two perfect solutions with volume V each are combined, then what is the volume of the solution as a result?जब V आयतन वाले दो पूर्ण विलयनों को संयोजित किया जाता है, तो परिणामस्वरूप विलयन का आयतन क्या होता है?
  1. AVV
  2. B2V2V
  3. CGreater than 2V2V से अधिक
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) 2V2V

Explanation

For an ideal (perfect) solution the volume change on mixing is zero (ΔV(mix) = 0), so mixing two volumes V gives exactly 2V.आदर्श (पूर्ण) विलयन के लिए मिश्रण पर आयतन परिवर्तन शून्य होता है (ΔV(मिश्रण) = 0), इसलिए दो आयतन V मिलाने पर ठीक 2V प्राप्त होता है।

Q92BPSC TRE 2.0 (2023) Chemistry Class 11-12
The negative side of the heat of solution or mixing is theघोल या मिश्रण की गर्मी का नकारात्मक पक्ष होता है
  1. Aheat of solutionघोल की गर्मी
  2. Bheat of dissolutionविघटन की गर्मी
  3. Cheat of reactionप्रतिक्रिया की गर्मी
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (D) More than one of the aboveउपर्युक्त में से एक से अधिक

Explanation

The negative of the heat of solution (mixing) is the heat change for the reverse process, and the official key treats both 'heat of solution' and 'heat of dissolution' as acceptable names for it. Hence more than one option is accepted.विलयन (मिश्रण) की ऊष्मा का ऋणात्मक, विपरीत प्रक्रम का ऊष्मा परिवर्तन होता है, और आधिकारिक उत्तर कुंजी 'विलयन की ऊष्मा' तथा 'विघटन की ऊष्मा' दोनों को इसके स्वीकार्य नाम मानती है। अतः एक से अधिक विकल्प स्वीकार किए गए हैं।

Q93BPSC TRE 2.0 (2023) Chemistry Class 11-12
A solution made up of numerous components in which each component’s property is the weighted sum of its separate properties is calledकई घटकों से बना एक समाधान जिसमें प्रत्येक घटक के गुण उसके अलग-अलग गुणों का भारित योग है, है
  1. Aideal solutionआदर्श समाधान
  2. Bnon-ideal solutionगैर-आदर्श समाधान
  3. Creal solutionवास्तविक समाधान
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) ideal solutionआदर्श समाधान

Explanation

In an ideal solution there are no extra interactions on mixing, so each property of the mixture (such as volume or vapour pressure) is the mole-fraction-weighted sum of the properties of the pure components.आदर्श विलयन में मिश्रण पर कोई अतिरिक्त अन्योन्य क्रिया नहीं होती, इसलिए मिश्रण का प्रत्येक गुण (जैसे आयतन या वाष्प दाब) शुद्ध घटकों के गुणों का मोल-अंश-भारित योग होता है।

Q94BPSC TRE 2.0 (2023) Chemistry Class 11-12
What is an example of camphor in N₂ gas?N₂ गैस में कर्पूर का एक उदाहरण है
  1. ASolid-in-gas solutionगैस के घोल में ठोस
  2. BGas-in-gas solutionगैस समाधान में गैस
  3. CSolid-in-liquid solutionतरल घोल में ठोस
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) Solid-in-gas solutionगैस के घोल में ठोस

Explanation

Camphor is a solid and nitrogen is a gas; camphor vapour dispersed in N₂ gas is the standard example of a solid-in-gas solution.कपूर ठोस है और नाइट्रोजन गैस है; N₂ गैस में परिक्षेपित कपूर वाष्प, गैस में ठोस वाले विलयन का मानक उदाहरण है।

Q95BPSC TRE 2.0 (2023) Chemistry Class 11-12
What happens when a solute crystal is added to a supersaturated solution?क्या होता है जब एक विलेय क्रिस्टल को सुपरसैचुरेटेड घोल में मिलाया जाता है?
  1. AIt becomes a colloidal solutionयह कोलॉइडी विलयन बन जाता है
  2. BThe solute dissolves in the solutionविलेय घोल में घुल जाता है
  3. CThe solute precipitates out of the solutionविलेय घोल से बाहर निकल जाता है
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (C) The solute precipitates out of the solutionविलेय घोल से बाहर निकल जाता है

Explanation

A supersaturated solution holds more solute than its solubility allows and is unstable. Adding a seed crystal gives a surface on which the excess solute crystallizes, so it precipitates out of the solution.अतिसंतृप्त विलयन में विलेयता की सीमा से अधिक विलेय होता है और यह अस्थायी होता है। बीज क्रिस्टल मिलाने पर अतिरिक्त विलेय को क्रिस्टलित होने के लिए सतह मिल जाती है, इसलिए वह विलयन से अवक्षेपित हो जाता है।

Q96BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which of the following is not a viable option?निम्नलिखित में से कौन-सा एक व्यवहार्य विकल्प नहीं है?
  1. AAerated drinksवातित पेय
  2. BBronzeकांस्य
  3. CHydrated saltsहाइड्रेटेड लवण
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) Aerated drinksवातित पेय

Explanation

The official key gives (A). Bronze (a solid solution of tin in copper) and hydrated salts (water in a solid) are solid solutions, while an aerated drink is a solution of a gas (CO₂) in a liquid; so aerated drinks are the odd one out.आधिकारिक उत्तर कुंजी में (A) दिया गया है। काँसा (ताँबे में टिन का ठोस विलयन) और जलयोजित लवण (ठोस में जल) ठोस विलयन हैं, जबकि वातित पेय द्रव में गैस (CO₂) का विलयन है; अतः वातित पेय अलग प्रकार का है।

Q97BPSC TRE 2.0 (2023) Chemistry Class 11-12
A cathode and an anode are the most common components of an electrochemical cell. Which of the following claims about the cathode is correct?कैथोड और एनोड इलेक्ट्रोकेमिकल सेल के सबसे सामान्य घटक हैं। कैथोड के बारे में निम्नलिखित में से कौन-सा दावा सही है?
  1. AOxidation occurs at the cathodeऑक्सीकरण कैथोड पर होता है
  2. BElectrons move into the cathodeइलेक्ट्रॉन कैथोड में चले जाते हैं
  3. CUsually denoted by a negative signआमतौर पर इसे नकारात्मक चिह्न से दर्शाया जाता है
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Electrons move into the cathodeइलेक्ट्रॉन कैथोड में चले जाते हैं

Explanation

The cathode is where reduction takes place, so electrons flow into the cathode from the external circuit. Oxidation occurs at the anode, and in a galvanic cell the cathode is the positive electrode.कैथोड वह स्थान है जहाँ अपचयन होता है, इसलिए बाह्य परिपथ से इलेक्ट्रॉन कैथोड में प्रवाहित होते हैं। ऑक्सीकरण ऐनोड पर होता है, और गैल्वेनी सेल में कैथोड धनात्मक इलेक्ट्रोड होता है।

Q98BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which of the following claims about electrochemical cells is true?विद्युत्-रासायनिक सेल के बारे में, निम्नलिखित में से कौन-सा दावा सत्य है?
  1. ACell potential is an extensive propertyसेल क्षमता एक व्यापक गुण है
  2. BCell potential is an intensive propertyसेल क्षमता एक गहन गुण है
  3. CThe Gibbs free energy of an electrochemical cell is an intensive propertyविद्युत्-रासायनिक सेल की गिब्स मुक्त ऊर्जा एक गहन गुण है
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Cell potential is an intensive propertyसेल क्षमता एक गहन गुण है

Explanation

Cell potential (EMF) does not depend on the amount of substance or the size of the cell, so it is an intensive property. Gibbs energy, ΔG = -nFE, depends on the amount reacting and is extensive.सेल विभव (EMF) पदार्थ की मात्रा या सेल के आकार पर निर्भर नहीं करता, इसलिए यह एक गहन गुण है। गिब्स ऊर्जा, ΔG = −nFE, अभिक्रिया करने वाली मात्रा पर निर्भर करती है और विस्तीर्ण गुण है।

Q99BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which of the following does not belong in the category of electrochemical cells?निम्नलिखित में से कौन-सा विद्युत्-रासायनिक सेल की श्रेणी में नहीं आता है?
  1. AVoltaic cellवोल्टाइक सेल
  2. BPhotovoltaic cellफोटोवोल्टाइक सेल
  3. CElectrolytic cellइलेक्ट्रोलाइटिक सेल
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (B) Photovoltaic cellफोटोवोल्टाइक सेल

Explanation

Voltaic (galvanic) and electrolytic cells interconvert chemical and electrical energy. A photovoltaic (solar) cell converts light energy directly into electricity, so it is not an electrochemical cell.वोल्टीय (गैल्वेनी) और विद्युत-अपघटनी सेल रासायनिक और विद्युत ऊर्जा का परस्पर रूपांतरण करते हैं। प्रकाश-वोल्टीय (सौर) सेल प्रकाश ऊर्जा को सीधे विद्युत में बदलता है, इसलिए वह विद्युत-रासायनिक सेल नहीं है।

Q100BPSC TRE 2.0 (2023) Chemistry Class 11-12
Which of the following assertions about the main cell is correct?मुख्य सेल के बारे में, निम्नलिखित में से कौन-सा दावा सही है?
  1. AAn example of a primary cell is a mercury cellप्राथमिक सेल का एक उदाहरण पारा सेल है
  2. BAn example of a primary cell is a nickel-cadmium storage cellप्राथमिक सेल का एक उदाहरण निकल-कैडमियम भंडारण सेल है
  3. CThe electrode reactions can be reversedइलेक्ट्रोड प्रतिक्रियाओं को उल्टा किया जा सकता है
  4. DMore than one of the aboveउपर्युक्त में से एक से अधिक
  5. ENone of the aboveउपर्युक्त में से कोई नहीं
Show answerHide answer

Correct answer: (A) An example of a primary cell is a mercury cellप्राथमिक सेल का एक उदाहरण पारा सेल है

Explanation

A mercury cell is a primary cell: its reaction cannot be reversed and it cannot be recharged. A nickel-cadmium cell is a secondary (rechargeable) cell, and reversible electrode reactions are a feature of secondary cells.मर्करी सेल प्राथमिक सेल है: इसकी अभिक्रिया उत्क्रमित नहीं की जा सकती और इसे पुनः आवेशित नहीं किया जा सकता। निकल-कैडमियम सेल द्वितीयक (पुनः आवेशनीय) सेल है, और उत्क्रमणीय इलेक्ट्रोड अभिक्रियाएँ द्वितीयक सेलों की विशेषता हैं।

How to use these BPSC TRE Chemistry questions

Every question here was asked in a real BPSC TRE paper; the paper and shift are shown on the card, and the number opens the question on its own page. Try each one before tapping Show answer, then attempt the full BPSC TRE papers as timed tests to check your speed under exam conditions.

More BPSC TRE subjects